2013年4月25日 星期四

貫古通今的聲音---喇吧

Listen to Historic Speakers - from 1924 to 1944 - Part 1



Listen to Historic Speakers - from 1924 to 1944 - Part 2

2013年4月22日 星期一

Mission impossible ------- Plasma Mid (Plasma 555) 離子中音


不可能完成的任務................. Plasma 555 離子中音


Ike Quebec
Heavy Soul [RVG Edition]
Plasma 555 playing only (driver VT4C-211), no Tweeter no Woofer.
250hz~4khz.



Ike Quebec
Heavy Soul [RVG Edition]
05 The Man I Love

2013年4月19日 星期五

讓西電 L9 的恐怖低音更恐怖.....哪裡掉的哪裡找回來

woofer spec. real  Imp. black line

 
 
Woofer low pass x-over simulation
mark 30hz close speaker Fs.


有沒發現喇叭內的 coil  10Hz~1kHz的連續阻抗線上黑色與另woofer分音線路下紅色線剛好相反mirror.
加起來也就阻抗是共軛matching......醬發現人家30hz 凸很高.......我們也能凸很高.
這就是建議的 .......哪裡掉的哪裡找回來.......否則別的暴力方法是容易多個香爐多個鬼.

模擬後smith chart 30hz close .實數組抗





2013年4月18日 星期四

有錢沒錢, 買個WE (西電)好過年-----西電 L9 的恐怖低音



有錢沒錢, 買個WE (西電)好過年-----西電 L9 的恐怖低音



1948 Western Electric L9 loudspeakers

Authentic 1948 Western Electric L9 loudspeakers in action at 2010 High End Show in Munich,
Germany. The music in the video is from Friedrich Gulda's LP "As You Like It",
on BASF (courtesy of Mr. Joe Roberts and Frank Schroder ).
連鋼琴踏板都很大聲.
Play Friedrich Gulda's LP "As You Like It"


以上有CD.....台灣沒賣
但可買 .....

Jazz Club - Swinging Jazz Piano  搖擺琴聲
01.Billy Taylor - La Petite Mambo
02. Tete Montoliu - Speak Low
03. Monty Alexander - Blue Alexander
04. Friedrich Gulda - Blues For H.G.
05. Milt Buckner - Glady's Dance
06. Francy Boland - Dark Eyes
07. Earl Hines - Second Balcony Jump
08. Oscar Peterson - Lulu's Back In Town
09. Eddie Thompson - How Could You Do A Thing Like That To Me
10. Eugen Cicero - Hello Dolly
11. George Shearing - Love Walked In
12. Paul Kuhn & Horst Jankowski - Honeysuckle Rose
13. Hank Jones - The Oregon Grinder
14. Red Garland - Daahoud
15. Hampton Hawes - I'm All Smiles


只是鋼琴踏板很小聲, 低音規模還是很恐怖.


2013年4月17日 星期三

Magic modify of converting cheap PP EL34 Amp's to 300B SE

Magic modify of converting cheap PP EL34 Amp's to 300B SE
              ------after all is dr. Klimo 300B circuit (OPT with Degauss coil inside )
Below  detail just usage one pole of P-P (push-pull)OPT coil to do  Degauss coil function.

hyper-link ....
http://www.audioasylum.com/cgi/t.mpl?f=tubediy&m=76018

Document...
I have now invested some time into this lark and a few things become clear.
If a typhical EL34 PP Amp is used with one EL34 as pure "Ballast" you can add your 300B on the other side.
The Impedance loading the 300B becomes 1/4 of the A-A impedance of the EL34 OPT. Typhically this will give between 1K - 1K5 nominalimpedance.
If we declare the 4 Ohm tap to be 8 Ohm and the 8 Ohm tap to be 16 Ohm we are fine(ish). If you need a < 8 Ohm output impedance you are nearly out of luck if your amp does not have 2 ohm Taps (few cheap chinese EL34 PP Amp's do). BUT, you can use a trick and connect your < 8R Speaker between the 4R & 8R Tap. This will give a tap with a very low nominal impedance, which would limit available power a little (which might explain thge rated 5W for the Beltaine).
BTW, I got a copy of the readers letter to CHF with the Beltaine schematic . Some interesting tricks. The EF184 driver pentode gets it's screen voltage from the 300B Cathode, 300B has LCL filtered DC heater. The EL34 uses an unbypassed cathode R and is indeed merely "ballast", balancing DC. The rest of the circuit is very traditional, EF184 drives 300B in classical Pentode driver, Triode output self biased circuitry .
So, converting any "surplus to requirements" cheap EL34 PP Amp to 300B SE in Klimo Beltaine style should be easy enough.

This is based on re-cycling a Dared Tube VP-80 which prooved way to unreliable for the guy who bought it.... Looks nice though:
Heaters for the 300B's will DC (probably LT1085-5 Reg) from the 6.3V Output Heaters and shared with the EL34 which will run AC.
The 6SN7's stage on AC, lifted to around 70V (in other words EL34 Cathode.
Some ideas are filched from Klimo (Screengrid/cascode upper grid bias, NFB switchable), some are mine.
To improve the way the DC magnetisation cancellation in the OPT tracks varying 300B's and to reduce differences between various EL34's the EL34 "Ballast" valve gets the Cathode voltage of the 300B as Gridvoltage, the cathode Resistor is suitably increased.
The Frontend uses a 6SN7 cascode to approximate a pentode, you can of course use a real pentode. The idea for me is to use only stuff I have "around" and good octal Pentodes are non too common in my stash.
The PSU substitues a Mosfet"Voltage Follower" for a choke, smaller (size is a premium).
Anyway, this should make an interesting little amp, gor for the usual WE Standard 7 - 7.5W....

In document we know Dared Tube main land China VP-80 clone already.

Principle ...
Old SE 300B connect high voltage on OPT coil cause  Hysteresis curve floating up (磁滯曲線飄起來) to O2 point.
Audio AC signal trasfer on the  Hysteresis curve then cause Audio AC signal  floating up too.
Meantime audio AC signal Loss signal sensivity and linearity (just partial saturation).


Here dr. Klimo 300B usage Degauss coil to pull back Hysteresis curve as below.
Driving Degauss  Tube as EL34 in circuit (as red line function).
If use Mosfet to replace EL34 then your need big heat sink(because always have DC current cross over Mosfet's D & S pole ).

Dr. Klimo is a  really master.

Sense of hearing
Old Tube amplifier always have good man-vocal  but woofer and tweeter seem  is  less a point .
But Dr. Klimo  circuit have something different just opposite.

The issue is cause tube ampifier RIAA play-bake curve have a drastic changes.

2013年3月22日 星期五

頻率響應是不是唯一的東西.....有沒發現人家30hz 凸很高.

頻率響應是不是唯一的東西 
 譯...Ultraudio   Frequency Response Isn’t the Only Thing

在過去的4年左右的時間,我已經在我的試聽室,測試-儲存近30 款揚聲器的頻率響應的測量,成果豐富。
我學會了如何使揚聲器在房間裡有良好互動,並熟知其中的關聯,
我聽到的音色變化如頻率響應圖所示;我變得敏銳地意識到這些細節非專家所說,也不顯示在頻率響應圖圖表中。
我認為每一個評論-及每一個死硬發燒友-該在家裡真確的測量揚聲器的頻率響應。
關於聲音重播的真相像永遠比知道的少。
揚聲器的頻率響應frequency-response(FR)的細節可以告訴你很多關於它的聲音。最明顯的例子是FR如何定義的音調平衡。
如果有一個上升的中頻(100-1000HZ),然後聲音通常會聽起來更前傾的聲場和有更大音像的存在。
如果在非常高的頻率(10kHz以上)有一向下的滾降,聲音將缺乏空氣感的表現且會有些沉悶。
如果有一個凸出的中低頻(60-100HZ),但很少低音音量(低於40Hz的),聲音將是沉重的,強硬的,
缺乏上述基礎,將無法擁有最深遠低沉的低音。這有太多案例。
關鍵是要了解如何你在圖中看到的修正與你所聽到的位置。
您聽到的聲音將永遠是你的揚聲器的輸出和房間所貢獻的,塑造該聆聽的組合。
這些是聆聽位置所聽到的。
但任何人都知道的任何經驗,在室內測量,和揚聲器的FR規格可以可以告訴你,
你聽到了很多關於它不能告訴你整個故事。其他聲音特性,在室內頻率響應:分辨率,透明度,音場,
成像等在我的經驗中,如沒有在無響室測量無法得到一些技術要素的根本你將有一個長長的清單的扭曲,
我不知道,它可以告訴你如何準確的重播現場在你的音響室。

丹拿 Dynaudio Focus 360



Rockport Technologies Arrakis


我能想到的兩個揚聲器的頻率響應曲線圖出現上面的例子沒有比這更好的。
Rockport Technologies Arrakis(下圖,綠色)和 Dynaudio Focus 360(上圖,紅色)是最中性的喇叭,
我曾經有過在試聽室測試。兩者基本維持平坦曲線。從平坦的偏差中,每個圖 - 峰表示,在25,160和480Hz的
 - 房間影響。兩者之間最明顯的差異是 Dynaudio Focus的輕微上升幅度從3到7KHz,
Rockport Technologies Arrakis在同一區域則輕微衰退。在每一案例下,如果你是在一寬廣試聽室。
這模式你會留下的基本上是中性的揚聲器。
雖然上面的FR頻率響應彼此都近乎完美的覆蓋,但任何人會告訴你在我的房間裡聽到的兩個揚聲器,
這兩個揚聲器的聲音是非常不同的。雖然都可以準確地描述為具有中性色調平衡,在沒有比較時,
當涉及到其決議的細節是整個演奏聆場感,原始錄音程度的透明度,其音場的寬度和深度,
其低音清晰度和整體的低音力量,Rockport Technologies Arrakis 明顯是簡單的優越在所有這些領域,
超越很多。
在房間的頻率響應不是一個有爭議的問題。進行這些測量結果也應該不是發燒友的一個音響系統信仰的威脅。
我相信,在室內,頻率響應 FR可以保持在適當的角度看,它只是其中的工具,
可以幫助你了解你所聽到的聲音-它絕不會告訴你一切。但是,如果你的目標是使您的聽音室,
還原現場的音質,它會是明智的...做法是不能忽視任何影響Hi-Fi議題,這些都有助於完成聲音拼圖,
並使聲音更身歷其境。全憑個人喜好。




有沒發現 30hz
......有沒發現人家30hz 凸很高.


在此25~40hz  剛好接近speaker Fs 也是易 mis-match 的點.
也就是喇叭內的 coil (等效電感啦) 的 Fs.
再想想石機管機輸出阻抗在那, 30hz ~1khz  來回阻抗差多少.
實際系統上每一級都是8Hz~20kHz的連續阻抗匹配包括cable....也包括喇叭內的 coil .

......要共軛阻抗matching.

2013年3月15日 星期五

SPL 1k dips issue ...1KH凹陷的原因


sorry 借小郭的圖好開個頭!
3音路電子分音 SPL.
1KH凹陷的原因.



Use ProAc M1 woofer crossover net to simulate.
Amp. out 8 ohm to  crossover { low pass filter ) to Speaker Scanspeaker 8545 .
Smith chart S21 blue line 藍色常看曲線 low-pass filter.   純量圖.


向量圖. vector.
共軛實部阻抗....
8 ohm @10hz.
6.8 ohm @1khz
3.2 ohm @3khz 已接近常態分頻點.



大於1khz 阻抗 over 8 ohm already.
在此1khz 剛好接近mis-match 起點.
實際系統上每一級都是8Hz~20kHz的連續阻抗匹配包括cable.

級 與 級之間......要共軛阻抗matching.

走過咖啡店早年歲月

咖啡店從無到有... 從有到無... 歲月的流逝 ,剩下的祇有記憶.

從無到有--- 舊店設立.
從有到無--- 拔營....牧咖啡的咖啡人.....移址, 啡客...........的遷徙.

咖啡店=咖啡+音樂

咖啡=日式咖啡+美式咖啡
日式咖啡=日式單品+日式花式咖啡
美式咖啡=美式單品+美式花式咖啡
.........."請不要找茶".

音樂=古典音樂+真空管